2T wire machine drawing spare parts , 6.5 - 5.5 mm wire drawing
spare parts
Specifications
Model:wire drawing machine spare parts
Inlet:0.8-1.2;Outlet:0.1-0.4
Advantage:High speed,small dimension
1 biggest inlet diameter: 6.5-5.5 mm
2 minimum outlet 1.2 1.8 mm
3 max compression ratio: 89.2%
4 the highest drawing speed 16m/s, normal speed: 12m/s
5 water and water pressure: 8 m³/h water pressure 0.25 Mpa or more
6 air and pneumatic: 2.0 m³/h Air pressure 0.6 Mpa or more
7 motor :
(1) the main motor: the first block 30KW, and the rest 22KW, ac
conversion motor
(2)Take-up machine :22KW ac frequency conversion motor (1,250
h-wheel),
(9) block: straight line type: diameter is 560mm
| inlet diameter(mm) | 0.8--1.2 | 0.5-1.0 |
| outlet diameter(mm) | 0.1--0.4 | 0.08-0.25 |
| drawing line speed(MPM) | 2500 | 2500 |
| drawing dies No./Max | 22 | 24 |
| slip ratio of m/c | 15% | 13% |
| fix speed capstan slip ratio | 8% | 8% |
| capstan | ceramic plasma | ceramic plasma |
| capstan dia.(max.)(mm) | φ242 | φ242 |
| fix speed capstan dia.(mm) | φ207 | φ207 |
| frame | ironed cast | ironed cast |
| main motor | 11KW three phase inductor motor | 11KW three phase inductor motor |
| spooler motor | 3.7KW three phase inductor motor | 3.7KW three phase inductor motor |
| revise system | Dual inverter control |
| inverter control | Dual inverter control |
| transmission type | flat belt |
| payoff method | over head |
| traversing unit | flat belt + timing motor |
| tension control | weightbalance by swing arm |
Compact and cost-effective
1 wire drawing in a single, compact
unit
2 ergonomic and user-friendly machine design,
with easy maintenance
3 left and right-hand versions for Non Ferrous
4 metal wires with the highest quality
5 requirements
6 single wire path with no crossover
effective single-wire drying
Warmly welcome! We will be your best partner and supplier.
Friendship is forever!
