high efficiency 4500*840*1720mm Welding Wire machine , 15kw Welding
Wire equipment
Wire Drawing Machine
usage:
this model of wire drawing machine can draw the low carbon,medium
carbon,high carbon wire and the material of wire can be
copper,aluminum,etc.so it is suitable for woodenscrews,electric
lead,copper rope ,spring industry.
Features:
easy operation,low noise,high efficiency
Specifications:
| max input diameter | 6.5/6.0 | mm |
| min output diameter | 2.2/2.0 | mm |
| rotation speed | 27-168 | r/min |
| each motor power | 15-22 | kw |
| each weight | 1400 | kg |
The production process:
№1 Pretreatment, rough production line
Steel wire pretreatment(including:Pay-off stand + Disorderly
parking+New type(water clean)+ Electrolytic pickling + boron
coating + High frequency drying + LZ6/560 straight-line wire
drawing machine + SG800 I-spool take-up machine or none stop
take-up machine
№2 Fine drawing production line
FX800 I-spool(or rotary ) wire pay-off machine + LZ8/400(or
LZ7/400)Straight line wire drawing machine + Tension stand + Wash
tank + SG630I-spool wire take-up machine
№3 Chemical copper plating production line
№4 Layer and packing production line
SG630 spool pay-off machine (active type) + middle + layer winding
machine
№5 S4525 heat shrinkable packaging machine for packaging,
warehousing
production equipment parameter
1. Wire material surface pre-treatment
1.1high shelf pay-off:Put a wire rod, without motor
1.2 Scribble and automatic stop switch: wire out
of the pay-off machine through the steel ring with
a diameter of 200 mm, if a few circle wire
entwined, steel ring that was taken to the other
side, t the bottom of the stroke switch will send
signals, and the entire line emergency stop.
1.3 Repeated bending mechanical shell and
wire ball strong scrubbing device: the wire rod
at least six direction perpendicular(National
initiative)Bending heat treatment to strip iron
oxide on the surface of the wire.
Eight peeling wheel, material: ZG45 steel, hardness of HRC50, Wheel
inner diameter Ф 115 --- Ф 120mm.
Wheel service life of 6000 hours. After
peeling ,the wire through period of tapered hole, use wire clean
ball strongly wipe the
surface of wire rod, and does not damage
the wire surface, reduce the waste into the electrolytic pickling
tank, ensure the
effect of pickling, facilitate drawing; By pressure cold water
irrigation and block and
impurities, rust on the surface of the wire rod export
high-pressure gas blowing
device, reduce by wire out of the water.
Special point:
1 use seal, integration of the whole machine design, introduction
of foreign top technology, more advanced than similar products in
the country. With high efficiency and low energy consumption,
stable and reliable operation, simple operation and other
characteristics. 2, can meet the needs of different specifications
of the shape of a single product, or a combination of size matching
diversified package 3, a power shake out device, to ensure that the
packaging is not damaged 4, a special thermal insulation structure.
Can not only play the role of the best energy-saving, and ensure
operator safety, application of the equipment in welding
consumables industry, with moisture, rust, prolong welding material
storage features 6, adapt to PE, PVC, and other various heat
shrinkable packaging materials.
Take-up system:
№1 Ф800mm I-Spool take-up machine
① Main transmission adopts the transmission efficiency high service
life long V transmitte take form;
② )With pneumatic brake and pneumatic top
device
③ Motor:15 kw variable frequency motor；
④ Ribbon cable with screw thread, maintenance
is simple and practical
⑤ take up by Ф800mm I-spool
⑥ There were equipped with a mechanical locking device, at any
speed, power outages, fly out to ensure that the wheel will not
hurt workers
№2 Ф500mm Trunk-type Unloading Machine
The speed mach with Wire drawing machine.Single layer take-up,The
surface of drum plat WC.Dia of drum is 560mm, take-up plate is
500kg, The machine have:2 take-up plate,2 wheel Barrow.Motor : 15KW
Technology parameters
Overall dimensions (L*W*H) 4500*840*1720(mm)
Max packing dimension (W*H) 270*100(mm)
Packing Speed 10-13 sets/min
Max sealing length 200mm
Conveyor horizontal hight 800+30(mm)
Working pressure about 0.5Mpa
Power source 50Hz/AC380Vthree phase five wire
Power(Max) about 15kW
